Skip to Content

Blog

How a metal roof is recycled

3/4" Inch RibAs you may know, a metal roof typically has a minimum of 25 percent recycled content. This means that it can be labeled as “green” and be included in the list of products that are recycled.

When a building is renovated or demolished, a metal roof is 100 percent recyclable in those cases. Whereas some roofing materials end up in a landfill — it’s estimated that 11 million tons of asphalt shingles are in landfills — metal can be reused in its entirety. 

But how does the recycling process work? The following information comes from the group Conserve Energy Future:

  • The metals are first sorted in terms of the base of their properties. The quality of the metal goes a long way when it comes to recycling it, so this is an important step in the process.
  • The metal is then squeezed and compacted so that they don’t take up as much space on the conveyor belts.
  • It’s now time to shred the metal. The material is broken down into small sheets or pieces so they can be processed with ease. The smaller-sized pieces can be melted and will use less energy to do so. Steel is normally changed into steel blocks, while aluminum is changed into sheets.
  • The scrap metal is then melted in a large furnace. (Each type of metal will be placed in a separate furnace.) This process does require energy, but not as much as it would take to make it from raw material.
  • The metals are then purified in different methods, with the help of electrolysis. The blocks are transported to different mills so that they can be remade into new products.

If you’d like to know more about how a metal roof is recycled in Central Florida, B&B Metals has the answers. Contact us today!

READ MORE

Hospital’s ‘butterfly’ design achieved by metal

The city of Chicago is known for its amazing architecture, and thanks in part to metal, it has another feather in its cap. The Tower Hospital at Rush University Medical Center, which was completed in 2012, has a unique butterfly shape. The architects used an “inside-out approach to design,” according to an article on the Metal Construction Association’s website.

The building was designed with is users in mind. The floor plan is essentially a triangle, which brings the patients closer together. This was especially important for the nurses who tend to all of them.

“We let that impact what the design needed to be,” said architect John Moorhead, the senior project designer at Perkins+Will. “The nurses talked about the number of miles they walk per shift. They were particularly interested in creating a plan that pushed together the patient rooms.”

But how to achieve the look? Metal. The firm used approximately 250,000 square feet of Alucobond Aluminum Composite Material in bone white to create the building.

“Metal provided flexibility and affordability,” Moorhead told the MCA. “It was a perfect choice to give the crisp white look that Rush was interested in, and it was easily adaptable to the curvilinear shape of the building.”

Want to know more about how a building’s design is shaped by metal in Central Florida? B&B Metals can answer any questions you may have. Contact us today for information.

Achieving the Tower’s goals

At one point, the butterfly shape of the building was almost scrapped in favor of a more standard rectangular shape, in order to stay within budget. But using the aluminum composite material became the answer they were seeking.

“Alucobond is durable, doesn’t warp and can be bent into any shape,” said architectural marketing manager Ben Branhan, of 3A Composites. “The Rush Tower has a lot of bends and curves. Alucobond provided the vehicle for architects to do that.”

The 840,000 square-feet hospital has 304 single-patient rooms. It’s located on the Eisenhower expressway, so it’s very visible to commuters.

According to Moorhead, one of the architects, “They really wanted to project an image of fresh, clean, modern and technically savvy. It is very crisp white, part of the image they wanted to project.”

Metal was a crucial factor in achieving this architectural masterpiece, and it can work for your needs as well. If you’d like to know more about how a building’s design is shaped by metal in Central Florida, contact us today!

READ MORE

Metal Roofing for Steep Slope Roofs

steep slope metal roof

Metal is a material that is frequently chosen for steep slope applications. It can easily be installed on these roofing types, and provides long term protection against the elements. There are a wide array of metal roofing styles that can be installed on steep slope roofs. If you are interested in purchasing materials for metal roofing for steep slope roofs in Florida or across the nation, feel free to contact our team.

Types of Steep Slope Metal Roofs

A steep slope metal roof will fall into one of two general categories: structural or architectural.

Structural Roofs

A steel slope structural metal roof can be applied over either open framing or a solid deck. They are most often installed over open framing. These metal roofing systems come in a wide array styles such as:

  • Vertical Standing Seams: These are fastened with hidden clips or fastening flanges
  • Corrugated or Tile Profiles: These metal roofing products overlap or interlock for a watertight fit.

Architectural Roofs

These roofs differ from structural systems in that they always require a solid substrate for application. Usually this is made of concrete, plywood or a metal roof deck. The varieties for architectural metal roofs are the following:

  • Standing seam
  • Corrugated and Tile Profiles
  • Horizontal Metal Panels

Usually an architectural metal roof is finished with a coating or paint for aesthetics and added protection.

Whether you are installing an architectural or structural steep slope metal roof, you can rest assured that the roof will be worth your investment. Steep slope metal roofs are known for their exceptional life span and ability to withstand large amounts of weathering. They can be the perfect steep slope solution for states like Florida that see large amounts of rain and other severe weather.

Our team can help you find the very best style of metal roofing for steep slope application and the right brand for your project. As a metal roofing distributor, we specialize in helping people find the perfect fit for their roofing needs.

Talk to us today about metal roofing for steep slope roofs in Florida or across the nation. We look forward to helping you see why metal is the perfect choice for your next roofing project!

READ MORE

Cost-Saving Benefits of Metal Roofing

classic style of metal roofing

When you are considering the right material for your next roofing project, we hope you will consider the durable option of metal roofing. Metal roofing has grown in popularity for both residential and commercial applications due to the wide array of benefits it provides. From the aesthetic appeal to the practicality of the system, metal roofing is known for its variety of advantages.

Check out the cost-saving benefits of metal roofing in Florida and across the nation.

Cutting Costs

Metal roofing materials offer the following cost-saving benefits:calculating costs

  • Due to the length of their life cycle, they have a better return-on-investment than many other materials. The material that metal roofing is made out of today is usually protected by extremely durable coatings / paints that will often result in a service life of 40 plus years!
  • Very low maintenance costs
  • Lowers your heating and cooling costs
  • Saves you money due to the fast installation process
  • Created to withstand extreme weather, leading to less money spent on weather related repairs
  • Often allows for eligibility for tax incentives

When it comes to installing a new roofing system, you want to find the very best for your building. We know how important saving money is for both home and business owners. That is why we believe our metal roofing products can be the perfect solution for you needs. We offer a wide array of products to fit every individual style and need. And we distribute metal roofing materials across Florida and the nation.

We can help you explore the cost-saving benefits of metal roofing in Florida and across the country. Please don’t hesitate to give us a call to see if metal roofing materials are the right choice for your next project. We look forward to helping you enjoy the money saving perks of metal roofing.

READ MORE

How metal can morph into other roofing styles

Metal is like the chameleon of roofing materials, because it can take on the appearance of many other roof types. The advantage is that it’s stronger and more durable than most others. According to the pros at the Metal Roofing Alliance, metal can be created to complement any style or finish of your home or business.

Among the types of roofing that metal can transform itself into:

  • bbslateSlate: This roofing system has been around for centuries and is very beautiful, but it’s also expensive and difficult to install. Metal roofing can take on the appearance of slate’s smooth, uniform tiles. For people who love the refined look of slate, the metal alternative can be the perfect choice.
  • Tile: One drawback about tile is its weight; it can be heavy on a structure. It’s also expensive to maintain in some cases. Metal tile, on the other hand, can resemble the graceful curves of tile but is lightweight and durable.
  • Shakes: Many homeowners love the look of a classic wooden, rugged shake. It’s easy to see why it’s so architecturally appealing. But it’s possible to achieve that same appearance with metal — and it will be more durable in the long run. You’ll also be able to choose from a variety of color choices.
  • Asphalt shingles: Metal is so versatile that it can look almost exactly like these shingles. While asphalt is an affordable and popular option, it’s not always the most long-lasting. The metal version will stand the test of time.
  • Vertical panels: These steel materials have traditionally been used on commercial, industrial or farm structures, but they’re now starting to be a more popular choice with homeowners. This is due in part to the fact that they can come in many different color combinations. Vertical panels are also a sound economic choice.

If you’d like to know more about how metal can look like other styles of roofing in Florida, contact us for more information. We’re always here to help!

READ MORE

Union Corrugating Highlight: Metal Roofing

Union CorrugatingUnion Corrugating creates a variety of metal roofing materials and products. We are proud to carry a full line of their products because we believe in the quality of their workmanship. As a Florida Union metal roofing distributor, we look forward to helping you find the best product of choice for your metal roofing project. Check out this highlight of Union’s metal roofing products:

Residential & Commercial Metal Roofing

1.25" Corrugated PanelUnion provides metal roofing products that are designed for residential, commercial and post-frame metal roofing applications. They provide both exposed and concealed fastener metal roofing systems. What is the difference between these products?

  • Exposed Fastener: These systems use screw fasteners that are visible on the exterior of the metal roofing surface. This type of system is extremely economical and has been proven as a reliable system over the many years it has been in use.
  • Concealed Fastener: This system employs a method that allows the screws to be completely concealed after installation. This product is available in standing seam metal roofing systems from Union. It is a wonderful choice for those who are looking for a high level of durability against extreme weathering since the fastener is never exposed to the elements.

If you are interested in a standing seam metal roofing system from Union, they provide three types: screw flange, snap lock and mechanically seamed. Feel free to contact us to learn about the specific benefits of each system.

Products Available

The following are all metal roofing products available from Union Corrugating Company:

Metal Roofing: Exposed Fastener

  • MasterRib: A popular choice for residentail and post-frame application
  • ValuRib: The economy version of MasterRib
  • 5v: A traditional five V profile
  • Corrugated: Original wavy profile of metal roofing
  • R, PBR, IR-Panel: Often chosen for industrial, commercial and steel frame buildings, a 4-rib profile

Standing Seam Metal Roofing: Screw Flange

  • Advantage-Lok II: Standing seam with inegral screw flang

Standing Seam Metal Roofing: Snap Lock

  • SL150: 1.50″ (1-1/2″) rib height, 16″ coverage snap lock standing seam
  • SL175: 1.75″ (1-3/4″) rib height  snap lock standing seam

Standing Seam Metal Roofing: Mechanically Seamed

  • ML150: 1.50″ (1-1/2″) rib height mechanical lock standing seam
  • ML200: 2.00″ rib height mechanical lock standing seam

Stone Coated Metal Roof Shingles

Ready to learn more about Union Corrugating products? Please feel free to contact a representative from B&B Wholesale Metals anytime! We are proud to provide these quality Union metal roofing products in Florida and across the nation.

READ MORE

Why a ‘cool’ metal roof is a hot trend

Metal Shingle HouseSometimes when we think about metal on a hot day, we assume it will be hot or warm to the touch. But that’s not the case with a modern metal roof. Due to advances in the production of the material, metal now uses reflective pigment technology to shed the harmful UV rays from the sun.

According to the nonprofit Metal Roofing Alliance, this reflective pigment comes in a variety of colors, finishes and textures. These “cool” roofs can be unpainted, pre-painted or coated with granules. The result? Substantial energy savings for you.

Did you know that the average household in America spends about $2,200 a year on energy bills? Nearly half of that cost goes to heating and cooling, according to the Energy Star program and the Metal Roofing Alliance. But metal can come to the rescue in helping keep those costs down, because it reduces both heating and cooling expenditures.

If you’re interested in learning more about why cool metal roofs are a trend in Florida,contact B&B Metals for answers!

Metal matters in energy savings

metal roofingA major trend in commercial roofing is to make the roof white, which better reflects the sun’s radiation and saves utility costs. But if you’re working with a residential project, a white roof isn’t always practical or attractive.

Luckily, “a metal roof doesn’t have to be white to be highly reflective,” says Bill Hippard, president of the Metal Roofing Alliance. “Rather than hearing complaints from neighbors, many homeowners looking to reduce year-round energy costs are choosing darker colored, yet highly reflective, metal roofs.”

These cool metal roofs look just like a traditional covering, but the difference you’ll see is in energy savings. According to the Metal Roofing Alliance, even utility companies are on board with cool roofs, because they reduce peak energy demand in the summer. This translates into fewer power outages.

More and more homeowners are seeing the light and choosing a cool metal roof. New statistics show that the number of houses with metal roofs has more than tripled over the past 10 years. Metal roofing has gone from 3 percent of the market to 10 percent.

Want to learn more about why cool metal roofs are a trend in Florida? Contact us today!

 

READ MORE

The Benefits of Union Products

5v CrimpAt B&B Wholesale Metals we are a proud distributor of products from the Union Corrugating Company. Union is an industry leader in metal roofing materials and carries a wide array of high quality products. Because of their commitment to high quality, durability and beauty, we are proud to provide Union products in Florida and across the nation. Learn more about the benefits of Union products here and as always, feel free to contact our team for further questions.

The Company’s History

Union CorrugatingUnion Corrugating Company has been providing metal building materials for over half a century. The company began in 1946, founded by Mr. J.E. Union. In the early 1950’s the company was small and the business struggling. Then in 1954 Hurricane Hazel struck North Carolina and destroyed roofs across the state. After the storm, trucks lined up at Union Corrugating Company who was at the time, the only local manufacturer of metal roofing. The foreman of the company asked Mr. Union what price they should charge since it would be the prime opportunity to bring in a large amount of extra money to pay their bills.

But J.E. Union believed in serving his community and responded to his foreman by saying “We’ll charge the same price today that we charge every day and not a penny more.” That day was a defining moment in the company’s history and built the reputation Union Corrugating has for being a fair, honest business that truly cares about their customers.

Now Union Corrugating Company leads the way in the metal roofing industry. They create products for residential, commercial and agricultural applications. They constantly strive to ensure their metal roofing products are the most durable, aesthetically pleasing and energy efficient.

Why choose Union?

If you are considering implementing Union Corrugating products into your metal roofing project, there are a variety of benefits in choosing this company. The following are all reasons Union products are a solid choice:

  • Durability: Union Corrugating focuses on extreme durability for their products. They engineer their products for the high winds and extreme weather we often see in Florida and across the East Coast.
  • Beauty: Although their products are known for extreme durability, Union Corrugating does not skimp on the aesthetic quality of their metal products. Their goal is for your building to stand out and match the overall design plan of your property.
  • Environmentally Friendly: The metal products that Union produces are engineered to provide you with the most environmentally friendly roofing system possible. They will help lower energy costs through their high reflectivity. And they are long lasting which means less roofing tear-off that winds up in landfills.

If you are ready to implement these beautiful metal roofing products from a company that is based in ethics and integrity, then please give B&B Wholesale Metals a call today. We are proud to be a Union Corrugating Company distributor in Florida and across the nation.

Learn more about Union Corrugating Company herehttp://www.unioncorrugating.com/

READ MORE

The many varieties of metal roofing

aluminum roofContrary to what some people believe, metal roofing doesn’t just come in one form. There are many different types, and all have their special qualities. Among the varieties:

  • Aluminum: According to the Metal Construction Association (MCA), more than 3 billion pounds of aluminum is used for construction each year in the United States.The majority of that goes toward roofing and wall systems. And it’s diverse; building owners can choose from a variety of colors and coatings. Not only will the colors last, but the roof’s coating will help it remain almost maintenance-free for years.
  • Steel: Always a popular choice for roofing, steel is very strong, versatile and durable, and it’s also a good economic choice. Steel can be found on top of all sorts of buildings, from libraries to schools to shopping centers. The American Iron and Steel Institute reveals that in the past several years, steel roof construction has been used in nearly half of all of the low-rise commercial buildings in the country.
  • Terne: Many people have never heard of this word; terne is a product that’s made by coating metals such as stainless steel with a specially formulated alloy, which goes a long way toward preventing corrosion. In its inception, terne’s alloy contained about 80 percent lead and 20 percent tin. But as it became clear in the 20th century that lead was harmful to our health, the alloy was changed to a combination of zinc and tin.

If you’d like to know more about the many different types of metal roofing in Florida, we’re here to talk about all of your options. Contact us today!

More metal types

Below are two more popular metal roofing choices:

  • Christ ChurchCopper: Did you know that a copper roof can last for centuries in some cases? The oldest copper roof in the country is found in Philadelphia, atop the historic Christ Church (pictured). It was installed on the church in 1742. Copper roofs are known for not only being long-lasting, but they’re also low-maintenance.
  • Zinc: Zinc, which is a natural material, retains the same look for its entire life, because it never fades and resists corrosion. In addition, it can conform to all sorts of design styles, so it’s a popular choice among architects. It also boasts a 100 percent clear water runoff.

If you’re interested in discussing the variety of metal roofing in Florida, contact B&B Metals today. Our customer service is unmatched in the industry, so put us to work for you.

READ MORE

Proof that a metal roof can be bold and artistic

VanDusen gardensMetal roofs, as we know, can in some cases take on the look of other common roofing materials. But have you ever associated the word “undulate” with metal? A daring architectural firm in Vancouver, B.C. took that approach and is now reaping the rewards for their work.

The VanDusen Botanical Gardens Visitor Centre was awarded the 2013 Chairman’s Award from the Metal Construction Association (MCA), thanks in part to its use of 12,000 square feet of Alucobond natural panels on the roof, which is designed to resemble five orchid leaves. Surrounding the panels is a vegetation-filled rooftop made up of Douglas fir beams and plywood, according to the MCA.

At one of the first meetings about the project, the architects at Perkins+Will were told to make the building “outrageous.”

“They wanted a building that really drew people in,” design principle Jim Huffman told the MCA. “It looks irrational and illogical, but if you understand how it was designed and the technology behind it, it’s actually quite clever.”

Designing the panel system

VanDusen gardensHow was this all put together? The metal installer Keith Panel Systems Co., LTD (KPS), out of Vancouver, created an interlocking system of prefabricated panels that would display positive and negative curves. The panels, says Huffman, proved to be easy and quick to install — but that doesn’t mean the project went entirely as expected.

“What you start with and what you think you’re going to do on a crazy building like this, and what you end up with, is a growth curve,” says Doug Dalzell, the founder of KPS. “This is art. This is not a solid product; it’s a shape and a form. And what you do is, you let the shape and form take over a little bit. If you try to do what we pulled off here from a flat sheet of metal, be it aluminum or stainless or whatever, it would probably kink on you.”

But in this case, the curved panels worked tremendously in the builders’ favor.

“It’s got a tremendous memory,” Dalzell adds. “It’s just alive. The more complicated the job, the more this product will work for you.”

Dalzell told the MCA that his firm decided to take on the daring project as a challenge. But it was a very enjoyable one: “When things like this come along, it’s a lot of fun, let me tell you.”

If this story has you intrigued and you’d like to learn more about the bold use of metal for roofs in Florida, contact us to talk!

READ MORE